your location: 首页>>News>>company news

Service Hotline

+86760-8787 8587

Customized 4.8-grade screw thread bar through wire thread bar 1 meter long screw 3/4

author:[email protected] Click:3627end source: time:2022-11-29 23:29:35

Summary of information:We have more than ten years of experience in the production of screw industry, the main products are: extra small copper...

Traditional rivets have a single purpose and need to be used in combination in most occasions. The operation is complicated, labor-intensive, and the connection quality cannot be guaranteed. Therefore, there is a need for an integrated rivet.

Self-locking nuts generally rely on friction. The principle is to press the embossed teeth into the preset holes of the sheet metal. Generally, the diameter of the square preset holes is slightly smaller than that of the rivet nut. The nut is connected with the locking mechanism. When the nut is tightened, the locking mechanism locks the ruler body, and the ruler frame cannot move freely to achieve the purpose of locking; when the nut is loosened, the locking mechanism disengages the ruler body, and the ruler frame edge body movement

T-bolts have been widely used in the fields of aviation, aerospace and defense due to their good positioning and anti-shedding effects. Its related standards have special requirements for accurate positioning, anti-falling off, and dimensional consistency of T-bolts. This requires that the position, size and shape and position tolerance of the anti-fall hole of the T-bolt shank must be controlled within a certain range. Therefore, the processing method of the anti-shedding hole is particularly important. Since the machined anti-shedding hole is located at the position of the rod, the milling processing efficiency is too low, the product cost is high, and there is a large machining error. When conventional drilling is used, the consistency of the anti-shedding hole size cannot be guaranteed. To solve the above problems of low efficiency and dimensional instability

The purpose of Yueluo is to provide a stamping process for screws. Before stamping, a sticky protective layer is coated on the pressure surface of the screw blank. The sticky protective layer can play a buffering role during stamping and prevent the screw head from being damaged. In order to achieve the above purpose, the technical solution of Yueluo is to design a screw stamping process, which uses a stamping die to stamp the screw blank and punch out the screw head; and before stamping, the pressure surface of the screw blank is coated with adhesive protection. layer.

In the process of construction of major projects, fasteners are mainly used to connect grooved embedded parts and fixed objects. They are widely used in civil curtain walls, prefabricated buildings, subways, high-speed railways and other industries.

We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: galvanized nylon flange lock nuts, straight-through embedded nuts, hexagonal top posts, electrical instrument knobs and other products, we can provide you with The right fastener solution for you.

tooth bar

Customized 4.8 grade screw


The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].