Service HotlineThe purpose of Guangdong Yueluo Hardware Industry Co., Ltd. is a kind of anti-loosening cylindrical pin with grooves specially designed for the multi-link transmission paint mixing mixer, which is specially designed for the problems existing in the above-mentioned prior art. The purpose of Guangdong Yueluo Hardware Industry Co., Ltd. is to realize through the following technical solutions: a kind of anti-loose cylindrical pin with groove, wherein: a plurality of axial V-shaped grooves are provided on the cylindrical pin, and the V-shaped groove Arrange evenly on cylindrical pins. There are three to four axial V-shaped grooves on the cylindrical pin. When Guangdong Yueluo Hardware Industry Co., Ltd. is in use, the cylindrical pin with V-shaped groove is installed in the vertical shaft, and cooperates with the U-shaped groove on the connecting rod to transmit torque. The cylindrical pin of the V-groove structure is an interference fit with the mounting hole of the vertical shaft. The biggest feature of Guangdong Yueluo Hardware Industry Co., Ltd. compared with the existing technology is that the cylindrical pin is used as a vertical shaft to connect with the connecting rod for torque transmission, which gives full play to the impact resistance and fatigue resistance of the cylindrical pin. The cylindrical pin has an interference fit with the pin hole, and each edge of the V-groove structure distributed on the cylindrical pin body will penetrate into the inner wall of the pin hole to prevent loosening.
Riveting is the most traditional way of connecting metal parts. It has the advantages of easy operation, high reliability and not easy to deform. It is widely used in the skeleton of outdoor products such as tents and camp beds. Commonly used aluminum alloy rivets use their own deformation or interference to connect the parts of the riveted parts in the riveting process. Due to cost and functional considerations, the rivet and the riveted material are often different, which is easy to occur in outdoor high humidity. Electrochemical corrosion, and the commonly used high-strength thin-walled pipes have a large shear stress on the aluminum alloy rivets at the riveting point. Under the combined action of the above two factors, it is easy to cause deformation or even breakage at the riveting point, which affects the life of outdoor products. A kind of Corrosion and shear resistant aluminium alloy rivets.
The heating bolt pre-stretching method makes the bolt pre-stretch to the required deformation amount by heating, and then tighten the nut. After cooling, the bolt is shortened and the connection is pre-tightened. This is a commonly used fastening method in infrastructure installations. However, it is not suitable for devices that often need to be disassembled and adjusted, because during the disassembly process, the connected parts will be heated and elongated together with the bolts, and the use of open flame heating will be limited in some occasions; the use of electric heating will make the structure of the screw It becomes complicated and increases the investment, and even if it is difficult to disassemble, such as the propeller shaft of the ship, etc., the heating method is not suitable.
When the tightening effect is achieved by the nut, it is often necessary to use a wrench to fix the nut or turn the nut to achieve the fixing effect. During the use process, the size of the nut is fixed, so it is necessary to use the corresponding type of wrench and the corresponding nut. In the tightening operation, during the installation process, the size of the wrench is large, that is, the nut cannot be manipulated, and it takes time to find a suitable wrench, which is inefficient.
The core rivet is another type of single-sided riveting. When riveting, the head of the rivet is hit with a hammer to expose the core, so that it is flush with the end face of the nail head, that is, the riveting operation is completed, which is very convenient, especially suitable for inconvenient Riveting occasions using ordinary rivets (which must be riveted from both sides) or blind rivets (lack of a rivet gun). Usually use flat head rivets, countersunk head rivets are suitable for occasions where smooth riveting is required on the surface. Some rivets can also be matched with clothing, becoming a popular element today, mostly the representative of punk style. In addition, there are paired rivets, which are special. Divided into two parts, the thicker section of the rod with a cap has a hole in the center, and the other section of the rod with a cap is an interference fit. When riveting, drive the thin rod into the thick rod.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: claw screw, mushroom screw, column plastic spacer, hexagonal nut and other products, we can provide you with suitable fastener solutions for you Program.
