your location: 首页>>News>>Industry News

Service Hotline

+86760-8787 8587

Processing GB58 hexagonal slotted nut coarse tooth fine tooth slotted nut flowering nut 5/8

author:[email protected] Click:7223end source: time:2022-10-06 08:15:03

Summary of information:We have more than ten years of experience in screw industry production, the main products are: national standard stainle...

Now people often use spring washers to lock nuts and bolts, spring washers, generally stainless steel and carbon steel non-closed spiral washers, under the nut, above the flat washer, increase the friction between the nut and the bolt, used to prevent The nut is loose to prevent vibration from loosening

Most of the blind hole installation rivets have the characteristics of light weight, reliable connection, high strength, and convenient and quick installation. For example, blind rivets have been widely used in various aerospace vehicles.

The paint mixing mixer used for color matching in the auto repair industry uses a multi-link connection transmission as the main driving force. The transmission of torque has higher quality requirements for the impact resistance and fatigue resistance of the cotter pin. During the use of the cotter pin, it was found that the cracking phenomenon occurred due to insufficient strength, resulting in the machine not running. In the existing multi-link transmission mode of the paint mixing mixer, the connecting rod drives more than 10 paint pots in each layer of the frame to stir, and the bottom connecting rod is also responsible for the transmission of the torque of the upper connecting rod, which leads to the connection between the connecting rod and the connecting rod. The pins connected by the rods must have strong impact resistance and fatigue resistance, and must have a certain anti-loosening function.

There are two grades of hexagonal nuts, one is grade 4.8, ordinary nuts, and the other is grade 8 nuts. For more industry knowledge about nuts, you can read the nut specification table and the national standard specification table of the nut industry. Knowledge of these nut specification sheets and industry standards. Allows us to have a deeper understanding of the nut.

The existing structure is found in the practical application experience that there are still the following problems and drawbacks: the screw structure and the screw space are combined with each other in a complementary manner, so they can provide a higher torque value, however, not every workpiece. The combination requires a high torque value, so it often results in excess quality. Although the price of the screw is low, if it can change the unchanging structure of the traditional screw, it can provide a technical means to simplify (change) the process. The effect of improving production capacity and convenience of use is indeed a technical bottleneck that the relevant industry should break through.

We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: cross recessed round head bolts, color zinc pull cap nuts, GB30 flat head socket head cap screws and bolts, double tooth screws and other products, we can provide you with suitable products Your fastener solution.

coarse teeth

Machining GB58 Hexagonal Slotted Nuts


The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].