your location: 首页>>News>>Industry News

Service Hotline

+86760-8787 8587

Customized nickel-plated hexagon nut carbon steel nut hexagon screw nut standard nut

author:[email protected] Click:7955end source: time:2022-12-14 21:51:44

Summary of information:We have more than ten years of experience in screw industry production. The main products are: galvanized pressure plate...

In our life, there are many solid wood furniture. The parts of these furniture are positioned and connected by connecting parts such as screws or nails, so the surface of the furniture will leave marks of screws or nails, or even some cracks, so that the surface of the furniture will not be damaged. Flat, particularly unsightly.

The material of the rubber gasket is NBR nitrile rubber, which is the most commonly used and has the highest cost performance. The use of FFKM perfluoroelastomer gaskets is generally in the more advanced fields, such as the field of aerospace rockets. Because its price is quite expensive, but its performance is excellent and can exceed many metal materials. For specific material information, please refer to the following: Material Name Chemical Description English Abbreviation English Alias Nitrile Butadiene Rubber Acrylonitrile-Butadiene Rubber Ethylene-Propylene-Diene Rubber EPDM EP,EPT,EPR Neoprene Neoprene CR Neoprene Silicone Silicone Rubber WMQ PVMQ Fluorosilicone Fluorosilicone Rubber FVMQ FVMQ Acrylate Acrylate Rubber ACM ACM Ethylene Acrylate Vinyl -Acrylic Rubber AEM Vamac Styrene-Butadiene Styrene-Butadiene Rubber SBR SBR Polyurethane Polyester/Polyether Urethane AU/Eu AU/EU Natural Rubber Natural Rubber NR NR

In the process of construction of major projects, fasteners are mainly used to connect grooved embedded parts and fixed objects. They are widely used in civil curtain walls, prefabricated buildings, subways, high-speed railways and other industries.

At present, with the development of my country's railway industry, many railway fastener systems involve T-bolts. The structure is shown in Figure 1. The dimensions that need to be inspected are head width A, head length B, and head straight table height. C. The height of the head slope D, the total length of the bolt E, and the major diameter of the bolt F. Due to the irregular shape of these places to be inspected, the measurement is difficult. The measurement of general measuring tools is not only slow, but also difficult to control human errors, resulting in some extreme upper limits and There are disputes and misjudgments about the size of the extreme lower limit when judging qualified and unqualified.

Some electronic products need to install some plastic parts or protective sleeves for components on the PCB, which need to be fixed by screws. The function of the fixture is to locate the PCB and the required installation parts, and increase the work efficiency. The existing screw fixture is inconvenient According to the needs of the site, the positioning station of the screw can be changed, the accurate positioning of the screw is difficult and the clamping effect of the workpiece is poor. A screw jig is proposed.

We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: hand percussion rivets GB867 aluminum dome head rivets, lengthened and thickened, split pin positioning pins, nameplate trademark solid rivets and other products, we can provide products such as You have the right fastener solution for you.

Carbon Steel Nut

Customized Nickel Plated Hex Nuts


The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].