your location: 首页>>News>>Industry News

Service Hotline

+86760-8787 8587

Production of galvanized thumb screws hand screwing flat screws racket bolts 3/4 1/4-20

author:[email protected] Click:5329end source: time:2022-10-26 22:44:41

Summary of information:We have more than ten years of production experience in the screw industry. The main products are: 1.5 teeth 12.9 grade ...

The purpose of Yueluo is to provide a stamping process for screws. Before stamping, a sticky protective layer is coated on the pressure surface of the screw blank. The sticky protective layer can play a buffering role during stamping and prevent the screw head from being damaged. In order to achieve the above purpose, the technical solution of Yueluo is to design a screw stamping process, which uses a stamping die to stamp the screw blank and punch out the screw head; and before stamping, the pressure surface of the screw blank is coated with adhesive protection. layer.

The flat gasket product is an accessory on the high-speed rail backing plate. The product requires two planes to be flat, the shape and size of the inner hole are accurate, and there are no casting defects (such as air holes, shrinkage holes, sand holes, etc.), and the casting material requires GB/T450-10 . Due to the light weight and large demand of flat gaskets, if they are produced by ordinary sand casting process, the castings are prone to deformation, sand holes, air holes and other casting defects, and the molding area is large, the production efficiency is low, and the production tasks are difficult to complete.

The national standard name of the cross recessed small pan head three combination screw is the cross recessed small pan head screw, the spring washer and the flat washer assembly. The national label is GB/T9074.8-1988. This 1988 refers to the year, that is, this standard is the standard issued by the country in 1988. The specifications of the cross recessed small pan head three combination screws, the company's minimum is M2.5, the shortest is 5mm, the largest is M10, and the longest is 90mm.

The screw rod in the ordinary T-slot nut is cuboid, so the T-slot nut can only be inserted into the nut from the end face of the T-slot, which makes it impossible to quickly complete the installation of the T-nut, which is inconvenient to use. Usefulness is greatly limited.

The purpose of Guangdong Yueluo Hardware Industry Co., Ltd. is to provide a fastener with a new structure with a nut, which cannot be tightened by conventional tools during use, and is suitable for special occasions requiring anti-theft.

We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: cross cylinder head bolts, manufacturing screws, carbon steel hardened black screws, 304 hexagon socket head bolts and other products, we can provide you with suitable tightening. Firmware Solutions.

hand-tightened flat screw

Production of galvanized thumb screws


The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].