Customized 12.9 alloy steel cup head inner hexagonal three-combination screw inner hexagonal three-combination bolt 3/4

We have more than ten years of production experience in the screw industry, the main products are: T-shaped pins, flat round head torx bolts, ledger screws and rivets, GB882 pin flat head cylindrical pins with holes, flat head chamfered bolts, full threaded tooth rod studs ,12.9 carbon steel high-strength screws, hardened black bolts, butterfly wing bolts, flat end socket head screw machine meters, flat head rivet nuts, GB901 black stud bolts, knurled nut copper insert nuts, C type Spring steel washers, GB882 pins and other fasteners, due to the different materials and specifications of the products, the prices are also different, if necessary, please contact us.

Online consultationMobile hotline
132 6870 6820
Product introduction

Screw Specifications

Screw head table

At present, for roller or needle roller bearings without cages, ribs, and low-speed operation, the structure mainly includes inner and outer rings and rollers or needle rollers in the raceway between the inner and outer rings, and additional The retaining rings on both sides of the roller or needle roller, among which the retaining rings added on both sides of the roller or needle roller are annular steel sheets punched from metal sheet, and their function in the bearing is only Correctly guide the rollers or needle rollers to run normally in the raceway between the inner and outer rings to prevent the rollers or needle rollers from deviating and slipping out of the raceway. The defect of the retaining ring of this structure is that first, because the rigid retaining ring and the inner ring are completely separated, there is a gap between the retaining ring and the installation shaft during installation. When the bearing is working, The retaining ring is driven by the outer ring and the rollers or needle rollers to rotate around the installation shaft. Due to the inconsistency of the structure, the retaining ring is easy to fall off during the rotation process, the safety of use is poor, and the rollers or needle rollers will appear toward the raceway. The situation of one side offset, which causes the bearing load center to offset, affects the reliability of the bearing operation, and ultimately affects the service life of the bearing; There is a gap between the raceways of the needle, so the tidbits, dust, etc. generated during the working process will continue to enter the raceway between the inner and outer rings. It is stuck; in addition, due to the gap between the steel retaining ring and the raceway, the grease stored in the raceway will be continuously lost, which will cause the bearing to heat up due to frequent lack of grease, or even burn out, which also affects the to the service life of the bearing.

Customized 12.9 alloy steel

pressure riveting nut pressure riveting tool Yueluo relates to a tool, specifically a pressure riveting nut pressure riveting tool. [Background Art] In order to quickly press riveting nuts, and to quickly switch press rivet nuts of different specifications and properties, and to ensure the press riveting strength between the press riveting nut and the piece during the press riveting process, a kind of Press riveting tooling. In order to overcome the deficiencies of the prior art, Yueluo provides a pressure riveting tool that can improve the strength of the pressure riveting and can switch the pressure riveting nut of different specifications and properties.

Cup head hexagon

Three combination screws

Double-end stud (English name: double-end stud) refers to a cylindrical fastener with threads at both ends. Widely used in electric power, chemical industry, oil refining, valves, railways, bridges, steel structures, automobile and motorcycle accessories, machinery, boiler steel structures, pendant towers, large-span steel structures and large buildings.

Hexagon socket three combination bolts

The existing combination screws and accessories are individually processed and then handed over to the customer for assembly. This method is prone to assembly problems, and the combination screws and accessories need to be marked with identification marks, which increases the production cost.


The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].

Cooperation Case

Hot Recommend